We are Manufacturer, Supplier, Exporter of Horizontal Type DSP Based Dynamic Balancing Machines and our set up is situated in Sangli, Maharashtra, India.
  • • Hard bearing type horizontal end driven two plane machines with microprocessor based / microcontroller based measuring panel.
  • • Suitable for balancing of different types of rotors like rotor of electrical machines, fly wheels, crankshafts, submersible pump rotors, etc.
  • • Measures & stores the unbalance in gms along with the angle for two selected correction planes on digital display.
  • • Additional bed length can be provided at extra cost for extra long rotors.
  • • Additional bed with gap bed arrangement is also possible to accommodate bigger diameter rotors.
  • • Minimum achievable unbalance upto 0.5 micron shift in c.g.
  • • Various Models – Suitable for rotors from 0.5 kg to 10,000 kg.
  • • Horizontal belt driven hard bearing two plane machines are supplied for rotors weighing from 0.3 kg upto 300 kg.
  • • Unbalance indication either by stroboscopic method or photo scanning method sensitivity upto 0.5 micron.
  • • Computerized / Electronic versions with printer facility & special machines to suit customers requirements can also be supplied.

Technical Specification - FBM-D

Model Unit FBM-10-DSP FBM-30-DSP FBM-50-DSP
FBM-100-DSP
FBM-300-DSP
FBM-650-DSP
FBM-1000-DSP
FBM-3000-DSP
FBM-7000-DSP
FBM-10000-DSP
Weight of Rotor kg.

0.5 - 10 1 - 30 2 - 50 3 - 100 10 - 300 20 - 650 10 -1000 30 -3000 70-7000 100-10000
Maximum diameter of rotor mm
500
500
500
1000
1000
1200
1600
2000
2400
3300
Maximum distance between bearings mm 480 480 1100 1350 1350 1650 1650 2400 3300 3300
Maximum distance between bearings mm *50 *50 *50 **100 **100 **100 350 500 500 500
Journal diameter range over std. roller carriage mm 5 - 50 5 - 50 5 - 50 20 - 100 20 - 100 20 - 100 25 - 140 35 - 200 55 -300 55 -300
Power of drive motor H.P. 0.33 0.75 0.75 2 3 5 7.5 20 30 40
Acceleration capability GD2n2 kgm3n2 0.29x106 0.37x106 0.37x106 0.88x106 3.9x106 8.56x106 14.12x106 88x106 160x106 216 x106
Minimum unbalance mass measured gm 0.01 0.1 0.1 0.1 0.1
0.1
0.1 0.1 1 1
Maximum unbalance mass measured kg. 0.4 4 4 4 4 4 4 4 40 40
Unbalance Reduction Raito % 95% 95% 95% 95% 95%
95%
95%
95%
95% 95%
Minimum achievable unbalance per rotor weight Microns or gmm/kg 0.5 0.5 0.5 0.5 0.5 0.5
0.5
0.5
0.5 0.5



Dynamic Balancing Machine - Model : FBM-50 PC


10 Ton capacity DSP Based Dynamic Balancing Machine, Model:FBM-10000 (DSP)


50 kg capacity Computerized Dynamic Balancing Machine, Model : FBM-50-PC

Technical Specification - FSBM-D

Model Unit FBM-10-DSP FBM-30-DSP FBM-50-DSP
FBM-100-DSP
FBM-300-DSP
FBM-650-DSP
FBM-1000-DSP
FBM-3000-DSP
Weight of Rotor kg.
0.3 - 10
0.3 - 30
0.5 - 50
3 - 100
0.5 - 300
15 - 650
20 - 1000
300 - 3000
Maximum diameter of rotor mm
250
500
500
800
800
1200
1600
2000
Maximum distance between bearings mm 700 700 1200 1500 1500 1650 1650 2400
Maximum distance between bearings mm *50 *50 *50 **100 **100 **100 350 500
Journal diameter range over std. roller carriage mm 5 - 50 5 - 50 5 - 50 20 - 100 20 - 100 20 - 100 25 - 140 35 - 200
Balance Speed (n) 800 - 3000 500 - 3000 500 - 3000 500 - 3000 500 - 2000 500 - 2000 200 - 1000 200 - 1000 200 - 1000
Power of drive motor H.P. 0.33 0.75 0.75 2 3 5 7.5 20
Acceleration capability GD2n2 kgm3n2 0.29x106 0.37x106 0.37x106 0.88x106 3.9x106 8.56x106 14.12x106 88x106
Minimum Achievable Unbalance Microns or gmm/kg 0.5 0.5 0.5 0.5 0.5
0.5
0.5 0.5



50 kg capacity DSP Based Dynamic Balancing Machine (Belt driven), Model : FSBM-50 (DSP)


Dynamic Balancing Machine, Model : FSBM-100 (DSP)


Machine Confirms to IS : 13277 : 1992

Notes for Minimum distance between bearings -
* For FBM - 10 / 30 / 50 swing diameter will be limited to 150 mm.
** For FBM-100 / 300 swing diameter will be limited to 250 mm.
Special Dynamic Balancing Machine as per customers requirements can be designed & supplied.


SAMPLE REPORTS
A = 0070 mm B = 0310mm
C = 0210mm
RL = 0060 mm
RR = 0060mm
TLL = 100 g mm TLR = 100 gmm
Trial : 0001 Speed : 700RPM
UL = 045 gm UR = 065gm
Angle : 60 Deg. Angle : 120 Deg.
In Tol. In Tol.

Balancing Instruments & Equipments (Miraj) Pvt. Ltd.

Related Products