We are Manufacturer, Supplier, Exporter of Electronic Extensometers and our set up is situated in Sangli, Maharashtra, India.
- • This instrument is to be used on Tensile or Universal testing machines to find out Proof stress & Young’s modulus values. In case of many brittle materials such as high carbon steels, alloy steels, light aluminium & magnesium alloys, it is difficult to get yield values. For such materials stress corresponding to a certain allowable amount of plastic deformation is termed as proof stress say 0.1% or 0.2% proof stress.
- • The measuring range is upto 5mm & resolution is 0.001mm.
- • Standard two fixed gauge lengths of 25 & 50 mm is provided. Different sizes gauge lengths can also be given at an additional cost.
- • If this extensometer is ordered with a computerized UTM, then a special menu driven application software is provided,
- • which accepts load & extension values, & evaluates proof stress values.
- • The measurement accuracy satisfies all requirements of class-I as per IS:12872-1990.
Technical Specification
| Accuracy |
Class 1 as per IS 12872 / ISO 9513 |
| Type | Strain Gauge type |
| Out-put | 0.3 mV / V / mm. (approx) |
| Excitation | 10 V. DC Nominal. |
| Measuring range | 5 mm. |
| Nominal resistance of bridge- | 350 ohm |
| Gauge length | 25 mm/50mm by means of extender |
| Resolution | 0.001 mm |
Fine Spavy Associates & Engineers Pvt. Ltd.(Unit - I)
